unisonic technologies co., ltd ud4606 power mosfet www.unisonic.com.tw 1 of 8 copyright ? 2010 unisonic technologies co., ltd qw-r502-144.c dual enhancement mode (n-channel/p-channel) ? description the utc ud4606 provides excellent r ds(on) and low gate charge by using advanced trench technology mosfets. the complementary mosfets may be help to form a level shifted high side switch and also for lots of other applications. ? features * n-channel: 30v/6.9a r ds(on) = 22.5 m ? (typ.) @ v gs =10v r ds(on) = 34.5 m ? (typ.) @ v gs =4.5v * p-channel: -30v/-6a r ds(on) = 28 m ? (typ.) @ v gs = -10v r ds(on) = 44 m ? (typ.) @ v gs = -4.5v * reliable and rugged ? symbol dip-8 sop-8 ? ordering information ordering number pin assignment lead free plating halogen free package 123456 7 8 packing ud4606l-d08-t ud4606g-d08-t dip-8 s1 g1 s2 g2 d2 d2 d1 d1 tube ud4606l-s08-r UD4606G-S08-R sop-8 s1 g1 s2 g2 d2 d2 d1 d1 tape reel
ud4606 power mosfet unisonic technologies co., ltd 2 of 9 www.unisonic.com.tw qw-r502-144.c ? pin configuration
ud4606 power mosfet unisonic technologies co., ltd 3 of 9 www.unisonic.com.tw qw-r502-144.c ? absolute maximum ratings (t a = 25 , unless otherwise specified) n-channel parameter symbol ratings unit drain-source voltage v dss 30 v gate-source voltage v gss 20 v continuous drain current (note2) i d 6.9 a pulsed drain current (note2) i dm 30 a dip-8 2.5 w power dissipation sop-8 p d 2 w junction temperature t j +150 storage temperature t stg -55 ~ +150 p-channel parameter symbol ratings unit drain-source voltage v dss -30 v gate-source voltage v gss 20 v continuous drain current (note 2) i d -6 a pulsed drain current (note 2) i dm -30 a dip-8 2.5 w power dissipation sop-8 p d 2 w junction temperature t j +150 storage temperature t stg -55 ~ +150 notes: 1. absolute maximum ratings are those values beyo nd which the device could be permanently damaged. absolute maximum ratings are stress ratings only and functional device oper ation is not implied. 2. surface mounted on 1in 2 pad area, t 10sec ? thermal data parameter symbol min typ max unit dip-8 74 110 /w junction to ambient (note) sop-8 ja 67 80 /w note: surface mounted on 1in 2 pad area, t 10sec
ud4606 power mosfet unisonic technologies co., ltd 4 of 9 www.unisonic.com.tw qw-r502-144.c ? electrical characteristics (t a =25c, unless otherwise specified) n-channel parameter symbol test conditions min typ max unit off characteristics drain-source breakdown voltage bv dss v gs =0v, i d =250ua 30 v drain-source leakage current i dss v ds =24v, v gs =0v 1 ua gate-source leakage current i gss v ds =0v, v gs =20v 100 na on characteristics gate threshold voltage v gs(th) v ds =v gs , i d =250ua 1 1.9 3 v v gs =10v, i d =6.9a 22.5 28 m ? drain-source on-state resistance r ds(on) v gs =4.5v, i d =5a 34.5 42 m ? dynamic characteristics input capacitance c iss 680 pf output capacitance c oss 102 pf reverse transfer capacitance c rss v gs =0v,v ds =15v,f=1.0mhz 77 pf switching characteristics turn-on delay time (note2) t d(on) 4.6 ns turn-on rise time t r 4.1 ns turn-off delay time t d(off) 20.6 ns turn-off fall time t f v ds =15v, v gs =10v, r g =3 ? , r l =2.2 ? 5.2 ns total gate charge (note2) q g 13.8 nc gate-source charge q gs 1.82 nc gate-drain charge q gd v ds =15v, v gs =10v, i d =6.9a 3.2 nc source- drain diode ratings and characteristics drain-source diode forward voltage(note2) v sd i s =1a, v gs =0v 0.76 1 v diode continuous forward current (note3) i s 3 a reverse recovery time t rr 16.5 ns reverse recovery charge q rr i ds =6.9a, di/dt=100a/ s 7.8 nc p-channel parameter symbol test conditions min typ max unit off characteristics drain-source breakdown voltage bv dss v gs =0v, i d =-250ua -30 v drain-source leakage current i dss v ds =-24v, v gs =0v -1 ua gate-source leakage current i gss v ds =0v, v gs =20v 100 na on characteristics gate threshold voltage v gs(th) v ds =v gs , i d =-250ua -1.2 -2 -2.4 v v gs =-10v, i d =-6a 28 35 m ? drain-source on-state resistance (note2) r ds(on) v gs =-4.5v, i d =-5a 44 58 m ? dynamic characteristics input capacitance c iss 920 pf output capacitance c oss 190 pf reverse transfer capacitance c rss v gs =0v,v ds =-15v,f=1.0mhz 122 pf switching characteristics turn-on delay time (note2) t d(on) 7.7 ns turn-on rise time t r 5.7 ns turn-off delay time t d(off) 20.2 ns turn-off fall time t f v ds =-15v, v gs =-10v, r g =3 ? , r l =2.7 ? 9.5 ns total gate charge (note2) q g 18.5 nc gate-source charge q gs 2.7 nc gate-drain charge q gd v ds =-15v, v gs =-10v, i d =-6a 4.5 nc
ud4606 power mosfet unisonic technologies co., ltd 5 of 9 www.unisonic.com.tw qw-r502-144.c ? electrical characteristics(cont.) parameter symbol test conditions min typ max unit source- drain diode ratings and characteristics drain-source diode forward voltage(note2) v sd i s =-1a, v gs =0v -0.76 -1 v diode continuous forward current (note3) i s -4.2 a reverse recovery time t rr 20 ns reverse recovery charge q rr i ds =-6a, di/dt=100a/ s 8.8 nc notes: 1. pulse width limited by t j(max) 2. pulse width 300s, duty cycle 2%. 3. surface mounted on 1in 2 pad area, t 10sec .
ud4606 power mosfet unisonic technologies co., ltd 6 of 9 www.unisonic.com.tw qw-r502-144.c ? typical characteristics n-channel drain current,i d (a) drain current,i d (a) drain current,i d (a) drain to source voltage,v ds (v) v gs =4.5v v gs =10v 60 50 40 30 20 10 0 5 10 15 20 on-resistance vs. drain current and gate voltage c iss c oss c rss f=1mh z v gs =0v 1000 900 800 700 500 600 400 200 300 100 0 05 10 15 20 25 30 capacitance characteristics drain to source on- resistance,r ds(on) (m ) reverse drain current,i s (a)
ud4606 power mosfet unisonic technologies co., ltd 7 of 9 www.unisonic.com.tw qw-r502-144.c ? typical characteristics(cont.) gate to source voltage,v gs (v) v ds =15v i d =6.9a 10 8 6 4 2 0 02 46 810 12 14 gate- charge characteristics t j(max) =150 t a =25 40 30 20 10 0 0.001 0.01 0.1 1 10 100 1000 pulse width (s) power (w) single pulse power rating junction- to-ambient gate charge,q g (nc) drain current,i d (a) normalized transient thermal resistance,z ja
ud4606 power mosfet unisonic technologies co., ltd 8 of 9 www.unisonic.com.tw qw-r502-144.c ? typical characteristics(cont.) p-channel drain current,-i d (a) drain to source voltage,-v ds (v) gate to source voltage,-v gs (v) 125 25 v ds =-5v 30 25 20 15 10 5 0 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 transfer characteristics -4v -4.5v -5v -6v -10v -3.5v v gs =-3v 30 25 20 15 10 5 0 0 1 2345 on-region characteristics drain current,-i d (a) drain to source voltage,-v ds (v) drain current,-i d (a) v gs =-10v v gs =-4.5v 0 5 10 15 20 25 10 15 20 25 30 35 40 45 50 55 60 on-resistance vs. drain current and gate voltage c iss c oss c rss 1500 1250 1000 750 500 250 0 0 5 10 15 20 25 30 capacitance (pf) capacitance characteristics drain to source on- resistance,r ds(on) (m ) drain to source on- resistance,r ds(on) (m ) reverse drain current,-i s (a)
ud4606 power mosfet unisonic technologies co., ltd 9 of 9 www.unisonic.com.tw qw-r502-144.c ? typical characteristics(cont.) gate to source voltage,-v gs (v) t j(max) =150 t a =25 40 30 20 10 0 0.001 0.01 0.1 1 10 100 1000 pulse width (s) power (w) single pulse power rating junction- to-ambient v ds =-15v i d =-6a 10 8 6 4 2 0 048 12 16 20 gate-charge characteristics gate charge,-q g (nc) drain to source voltage,-v ds (v) drain current,-i d (a) 10 s 100 s 1ms 10ms 0.1s 1s 10s dc r ds(on) limited t j(max) =150 t a =25 100.0 10.0 1.0 0.1 0.1 1 10 100 maximum forward biased safe operating area single pulse 10 1 0.1 0.01 0.00010.001 0.01 0.1 1 10 100 1000 0.00001 pulse width (s) normalized maximum transient thermal impedance normalized transient thermal resistance,z ja in descending order d=0.5,0.3,0.1,0.05,0. 02,0.01,single pulse d=t on /t t j,pk =t a +p dm .z ja .r ja r ja =62.5 /w p d t on t utc assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all utc products described or contained herein. utc products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. reproduction in whole or in part is prohibited without the prior writ ten consent of the copyright owner. the information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice.
|
